Loading...

Home > Sound Blaster > Sound Blaster Audigy 2 Front Panel Not Working

Sound Blaster Audigy 2 Front Panel Not Working

bingo191211-12-2005, 04:44 PMI have a similar problem After formatting my dri've. Featured Forums Apollo Justice: Ace... Fortunately, this cable is actually far more robust than the 40-pin ribbon cable - but it could still be a problem. I have power and the cable is plugged in. http://philgiebler.com/sound-blaster/sound-blaster-audigy-2-zs-front-panel-not-working.html

Super Paper Mario Super Smash Bros. Hogs of War 2 Punch-Out!! I had to reinstall the driver tho to get the desktop speakers to word. Friday, May 13, 2005 WARNING: You can damage or destroy your sound card by following any of these instructions. http://www.techsupportforum.com/forums/f23/sound-blaster-audigy-2-front-panel-not-working-231193.html

The headphone jack on the front panel sometimes works but for the most part refuses to work and exhibits the same symptoms that you described in your post.I have thoroughly examined However, I really wanted the speakers to mute when I plugged in the headphones. The DevHardware.com forums have a discussion, but it's unsatisfactory. Now I have no mikes and had to cancel a recording session.

The program recognizes that the headphone jack is plugged in and when configured, the external speakers are muted properly. The Red Stripe on the cable must be connected so the red stripe is at the same end where the connector is marked with a white triangle silkscreened onto the pc-board Join Date: Jan 2007 Posts: 23,002 OS: Xp Hi, welcome to TSF. Wii Wii Forums Games Forum Directory Wii Forum Top Forums Bleach: Shattered Blade Dragon Ball Z: Budokai...

I have a very long front panel cable so I only needed something around 4 inches. for... i don't blame forum users, not everyone knows, i blame tech support b/c you don't respond. http://www.tomshardware.com/forum/214666-28-connecting-audigy-front-panel-sockets Here it is:Use the permanent marker to color the end of the connector that is pin1.

Then I did a lot of google searching that took almost a week. including the front panel. pandaking11-12-2005, 08:21 PMAfter googling my butt off, I have discovered that the front panel uses an AD_EXT cable, and after lots of thinking there is a very very very slim chance This is where the needle nose pliers, magnifying glass and lots of patience come in handy.

Do anything in the headphone detection tab and the headphone jack dies. Anyone with this problem. Style Default Style Contact Us Help Home Top RSS Terms and Rules Forum software by XenForo™ ©2010-2016 XenForo Ltd. © Heaven Media Ltd. Well more investigation. (I'm also open to more suggestions from readers/users of this blog.) Eventually, if I get it figured out I'll update the blog with new diagrams and pictures.

You can also change the 10 position .100" housing to be a different configuration of 10 pins. navigate here There is no way that a volume PC peripheral manufacturer would ever use a non-standard or hard to find connector. General Wii U Hyrule Warriors Splatoon Super Smash Bros. Harvest Moon: Skytree...

This cable is actually identical in construction to a standard 40-pin IDE Cable - except for the connectors on the end of the cable with custom blank-offs for the removed pins Took me months to get my Platinum to "play nicely" with Vista. There's no way in hell you're going to keep reaching around to the back of the case to switch the connector from your regular speakers to your headphones... http://philgiebler.com/sound-blaster/sound-blaster-audigy-front-panel-not-working.html Then you can proceed to plug the other end into the Audigy2 ZS.

It should look like this:Notice that I've marked pin 1 with red marker to keep things straight. (I also got a little over zealous and shrunk the heatshrink tubing early. Featured Forums Mario Kart 8 Monster Hunter 3 Ultimate New Super Mario Bros. It has to be cheap and easy to source.

Can I ask you, if you unplug the firewire to the front panel, does it still work?

Here is what I consider a good crimp/connection:The first band is the crimp for the insulator. Thanks for the input... I've downloaded lastest drivers, ect..., If no one can help does enyone know a 1-800- number for creative labs? Then crimp the WM2515-ND terminals onto the conductors in a similar fashion as described in step 7.

Any help would be appreciated.Click to expand... Also - make sure the front panel gets power (4-pin plug). 04-07-2008, 01:58 PM #3 somerandomguy1 Registered Member Join Date: Apr 2008 Posts: 2 OS: XP Media Center You as the reader assume all liability for any damage arising from trying to follow these instructions. this contact form You can't believe you spent all this money on a nice case and you can't use the front panel.

solved Front panel connections 2 reset switch!!? Creative never made true MCE drivers for this, I think that is the problem. Stupid creative... « Help with mic recording | [SOLVED] sound card missing » Thread Tools Show Printable Version Download Thread Search this Thread Advanced Search Posting Rules You may not The time now is 03:11 PM. -- Mobile_Default -- TSF - v2.0 -- TSF - v1.0 Contact Us - Tech Support Forum - Site Map - Community Rules - Terms of

By continuing to browse our site you agree to our use of data and cookies.Tell me more | Cookie Preferences Partially Powered By Products Found At Lampwrights.com Connecting the SoundBlaster They looked very similar. i have had more problems with my audigy 2 platinum in the 2.5 yrs i've had it than a new born baby. I also have an Audigy 2 ZS Platinum with front panel that works 100%; and so I know my new headphones are not at fault.The guy I bought the SB0090 from

The heat of a single candle is enough to shrink the tubing into place.Step 12:Connect your new cable up to the Audigy2 ZS and your front panel. If those sliders are not present - your system has not detected your sound card as a unit with a front panel connected. Migrating to new URL, no 301... » Site Navigation » Forum> User CP> FAQ> Support.Me> Steam Error 118> 10.0.0.2> Trusteer Endpoint Protection All times are GMT -7. That said it should be available on the Internet somewhere.So how did I find this connector?

The problem with this theory is that if the cable is bad, it is not easily replaced. Had a done a little more investigation I'd have noticed what has been pointed out in the comments: that the VRef for the mic isn't 5V, but 2.5V. Enjoy having sound and a microphone jack on the front of your case:connected to the Audigy2 ZS...in the case with the front panel cable connected to our adapter...Step 13:According to Brian Whilst the game port now works, the front panel still does not respond to anything and I am at a loss.

Featured Forums Animal Crossing: New Leaf Bravely Second: End Layer Harvest Moon: Skytree... ZERO, NONE, NADA, NOT ONE RESPONSE. Powered by vBulletin Version 4.2.2 Copyright © 2016 vBulletin Solutions, Inc. Transformers: Revenge...

I suggest ordering triple the pins you need and double the housings.Obtain the following (at any electronics supply like Fry's or cannibalize an old cable):45cm (18") of CAT5 ethernet cable.5 inches If you do replace the cable with a standard "universal" 40-pin IDE Cable, you have to very carefully observe the polarity on the cable when connecting the cable to the pc-boards

© Copyright 2017 philgiebler.com. All rights reserved.